Under-Sink Reverse Osmosis (RO) Drinking Water Purification

Even when whole-house filtration clarifies well water and neutralizes acidity, microscopic chemical contaminants, heavy metals, and emerging pollutants can remain dissolved in drinking water. In Western North Carolina, naturally occurring arsenic, radon daughters, heavy nitrates from agricultural runoff, and PFAS industrial chemicals threaten household health. Our commercial-grade under-sink reverse osmosis (RO) systems provide point-of-use purification down to the molecular level.

Request Emergency Dispatch

Multi-Stage Micro-Porous Thin-Film Composite (TFC) Membranes

At the heart of our RO systems is a semi-permeable thin-film composite membrane with pores measuring just 0.0001 microns—over 500,000 times smaller than a human hair. Operating under household line pressure, the membrane rejects up to 99% of dissolved contaminants down the drain line.

Advanced Pre-Filtration & Remineralization Alkaline Polishing

Pure RO water can taste flat due to complete mineral stripping. Our 5-stage systems incorporate catalytic carbon pre-filters to scrub chlorine and volatile organic chemicals, followed by post-membrane calcium-magnesium remineralizing cartridges that restore balanced alkaline pH and refreshing crisp taste.

Dedicated Designer Lead-Free Countertop Faucets & Refrigerator Hookups

Purified drinking water is dispensed through heavy solid brass, lead-free designer faucets available in brushed nickel, matte black, and chrome finishes. We also run clean polyethylene lines directly to your refrigerator's ice maker and door dispenser for crystal-clear cocktail ice.

Comprehensive Contaminant Rejection for PFAS, Arsenic & Heavy Metals

Tested to NSF/ANSI Standard 58, our systems provide proven reduction of arsenic, fluoride, lead, nitrates, pharmaceutical residues, radium, and microplastics, providing pure bottled-water quality straight from your kitchen tap without plastic bottle waste.

Frequently Asked Technical Questions

What contaminants does a reverse osmosis drinking water system remove?

An RO system removes up to 99% of dissolved solids, including arsenic, lead, nitrates, PFAS chemicals, microplastics, fluoride, heavy metals, chlorine, and pharmaceutical residues.

Where is the reverse osmosis system installed?

The compact filter unit and 3.2-gallon pressurized storage tank install neatly inside your kitchen base cabinet beneath the sink, connecting to a dedicated countertop designer faucet.

How often do reverse osmosis filters and membranes need to be changed?

Sediment and carbon pre-filters should be replaced once per year; the semi-permeable reverse osmosis membrane typically lasts 3 to 5 years before replacement.

WNC MOUNTAIN WELL WATER DIAGNOSTIC WIZARD

Instant Well Water Treatment & Installed Cost Calculator

Select what you're noticing in your water to calculate your custom filtration setup, chemical cause, and estimated turnkey installed price range across Western NC.

STEP 1 OF 3 What are you noticing in your water? (Tap to select)
Tap cards to highlight

Tap any card below to highlight and include in your diagnostic estimate:

🔵
Blue Stains
Acidic Copper (<6.5 pH)
🟤
Rust / Iron
Dissolved Well Iron
⚫
Black Specks
Manganese Minerals
🥚
Sulfur Odor
Rotten Egg Well Gas
⚪
Hard Scale
White Calcium Crust
⏳
Sand / Silt
Turbid Storm Runoff
☣️
Bacteria Risk
Coliform Hazard
🧪
Pure RO Water
PFAS, Lead & Drinking
STEP 2 OF 3 Home Sizing & Peak Water Demand

Select household capacity to calibrate valve sizing and continuous flow rate:

If you have lab readings or test strip results, enter them for precise chemical sizing:

Water pH Level (Acidity): 6.0 pH
6.5–7.8 neutral. <6.5 dissolves copper.
Iron (Fe ppm):
EPA limit: 0.3 ppm.
Manganese (Mn ppm):
EPA limit: 0.05 ppm.
Hardness (GPG):
0–3 soft, >7 hard scale.
ESTIMATED TURNKEY INSTALLED PRICE RANGE
$3,800 – $5,200
Includes complete certified equipment, professional bypass manifold tie-in, drain connections, initial media charge, and complimentary 30-day post-installation water re-testing.
⚙️ RECOMMENDED EQUIPMENT CONFIGURATION
🔬 REAL-TIME TECHNICAL DIAGNOSIS

Analyzing mountain well chemistry parameters...

📋 Lock In This Estimate & Request Specialist Review

Enter your name and phone number to lock in your calculated price range and have an on-call Western NC certified water treatment specialist review your well water diagnostics.

Prefer immediate assistance? 📞 Call Dispatch: (828) 338-6082